Presentation Schedule
| Day 0 – 12 April 2026, Sunday | ||||
|---|---|---|---|---|
| Time | Program | |||
| 16:00-18:00 | ST Center Main lobby 1F | |||
| Conference Registration | ||||
| 18:00-20:00 | “Busan Samjung – Korean restaurant” / “부산 삼정 – 한식당” | |||
| Welcome Reception | ||||
| Day 1 – 13 April 2026, Monday | ||||
|---|---|---|---|---|
| Time | Program | |||
| 08:50- | ST Center lobby B1F | |||
| Registration | ||||
| 09:20-09:40 | International Conference Hall 1 | |||
| Opening Ceremony | ||||
| Welcome address | ||||
| 09:40-10:20 | Session Chair : Prof. Fengzhou Fang (Tianjin University, China) | |||
| Plenary Speech 1 Feynmann’s and Faraday’s Legacy to Nanomanufacturing Prof. J. A. McGeough The University of Edinburgh, UK |
||||
| 10:20-11:00 | Session Chair : Prof. Wei Gao (Tohoku University, Japan) | |||
| Plenary Speech 2 Metal-Polymer Multi Materials Using Nano/Micro Textures Prof. Yusuke Kajihara The University of Tokyo, Japan |
||||
| 11:00-11:05 | Group Photography | |||
| 11:05-11:20 | Tea Break @ Lobby (B1F) | |||
| 11:20-12:00 | International Conference Hall 1 | |||
| Session Chair : Prof. Shuming Yang (Xian Jiaotong University, China) | ||||
| Plenary Speech 3 Advancing from Classical to Quantum Precision Displacement Measurement: State-of-the-Art and Atomic Time Grating Sensors Prof. Xiaokang Liu Chongqing University of Technology, China |
||||
| 12:00-13:00 | Lunch Break @ International Conference Hall 1 | |||
| 13:00-14:00 | International Conference Hall 1 | |||
| ISNM General Assembly | ||||
| 14:00-14:40 | Session Chair : Dr. Seung-Kook Ro (Korea Institute of Machinery & Materials, Korea) | |||
| Plenary Speech 4 Ultra Precision Story in KIMM Dr. Chun-Hong Park Korea Institute of Machine & Materials, Korea |
||||
| 14:40-15:20 | Tea Break @ Lobby (B1F) | |||
| 14:40-15:20 | Auditorium 4 | |||
| Poster Session I | ||||
| 15:20-17:40 | Session Room 1 (International Conference Hall 1) |
Session Room 2 (Auditorium 1) |
Session Room 3 (Auditorium 2) |
Session Room 4 (Auditorium 3) |
| Session Chairs : Dr. RONGYAN SUN (The University of Osaka, Japan) Prof. Hui Deng |
Session Chairs : Dr. So Ito (Toyama Prefectural University, Japan) Prof. Kai Meng |
Session Chairs : Dr. Yang Yin (Southwest Jiaotong University, China) Prof. Masaki Michihata |
Session Chairs : Prof. Seokmin Kim (Chung-Ang University, Korea) Prof. Honggang Zhang |
|
| Atomic and Close-to-Atomic Scale Machining (ACSM) I |
Measurement & Metrology I | Micro/Nano – Machining I | Micro/Nano – Patterning I | |
| Keynote Speech 1 Atomic and close-to-atomic scale manufacturing processes Prof. Xichun Luo University of Strathclyde, United Kingdom |
Keynote Speech 2 Deep Learning Enabling Intelligent Fringe Structured Light 3D Measurement Prof. Xinghui Li Tsinghua University, China |
Keynote Speech 3 Material-Specific Transient Near-Surface Modulation Strategies for Advancing Ultra-Precision Machinability Prof. Hao Wang National University of Singapore, Singapore |
Keynote Speech 4 Laser interference lithography for the fabrication of further flexible fine pattern structures Prof. Yuki Shimizu Hokkaido University, Japan |
|
| Invited Speech 1 Atomic-scale manufacturing through enzymatic hydrolysis machining Prof. Hui Deng Southern university of Science and Technology, China |
Invited Speech 2 Optical overlay metrology for semiconductor manufacturing Prof. Kai Meng Nanjing University of Aeronautics and Astronautics, China |
Invited Speech 3 Fluorescence-based on-machine surface metrology for mechanical machining Prof. Masaki Michihata The University of Tokyo, Japan |
Invited Speech 4 Leap from conventional ultra-precision electroforming to digital twin electroforming Prof. Honggang Zhang Beijing University of Technology, China |
|
| P00006 Polishing characteristics of aluminum nitride ceramics by plasma-assisted polishing Dr. RONGYAN SUN The University of Osaka, Japan |
P00028 Near-Atomic-Scale Conjugate Self-Calibration of a Large-scale Planar Two-Dimensional Variable-line-spacing Grating via Laser Phase-Shifting Interferometry Dr. Xin Xiong Chongqing University of Technology, China |
P00060 Ultra-Precision Manufacturing of Silicon Carbide Crystals and Composite Materials for High-Performance Applications Dr. Yang Yin Southwest Jiaotong University, China |
P00033 Nano-lens array of chalcogenide glass fabricated using two-step precision glass molding Mr. Tao Zhu Shenzhen University, China |
|
| P00076 High-efficiency and high-quality polishing of diamond surface assisted by implantations of hydrogen and oxygen ions Mr. xiang zhou Southwest Jiaotong University, China |
P00007 Form measurement of hand-scraped surfaces using an Abramson oblique- incident interferometer Dr. So Ito Toyama Prefectural University, Japan |
P00133 Integrating Coating Technology and Nanometer-level Polishing for High-Performance Polymer-Metal Hydraulic Tribopairs Mr. Duoxun Fang Southwest Jiaotong University, China |
P00063 Anti-bacterial surface with micro-grooves from ultra-precision machining for public lifts Ms. Yang Lam Gladys Chan The Hong Kong Polytechnic University, Hong Kong |
|
| P00154 Study on the plasma-assisted cutting of matels and alloys by grain-size control and near-surface purification Dr. Peng Lyu Ningbo Institute of Materials Technology and Engineering, China |
P00096 Nanoscale Thermal Characterization of Metal Thin Films with Varying Thickness Using Passive Scattering-Type Scanning Near-Field Optical Microscopy Mr. Yongzhi Wang The University of Tokyo, Japan |
P00158 Cup Wheel Material Removal Mechanism Based on Trochoidal Model: Transition from Scratching to Grinding Dr. Pengcheng Zhao Tianjin University, China |
P00084 Immersion Interference lithography fabrication of sub-wavelength gratings using spatial polarization modulation Mr. Tianshi Lu Tsinghua University, China |
|
| P00163 Achieving ultra-smooth and damage-free surface on deep structure through understanding the material removal mechanism of the modification layer Prof. Haixiang Hu CIOMP, CAS, China |
P00034 Three-Axis surface encoder based on Littrow Configuration Mr. Zhiyang Zhang Tohoku University, Japan |
P00048 Study on manufacture approach of optical freeform surfaces by performance evaluation Dr. Xianlei Liu Tianjin university, China |
P00155 Genetic-Algorithm-Based Research on Key Technologies for Motion System Calibration and Error Control for the Precision Marking System Dr. Jiang Li Tianjin University, China |
|
| P00066 Atomistic study of material removal behavior during ultrasonic vibration assisted nanoscratching of single-crystal AlN Prof. Chen Xiao Southwest Jiaotong University, China |
P00168 Fabrication and growth properties of spherical diamond shell through microwave plasma chemical vapor deposition Dr. Hui Li Zhejiang University, China |
P00167 Coaxial Laser Confocal Measurement for In-situ Surface Topography in Ultrafast Laser Processing Mr. Ruiyang Xiao Zhejiang University, China |
||
| P00017 High-Precision Measurement of Complex Reflective Surfaces Based on Mobile Multi-Line Projection Mr. Xinyuan Cao Tianjin University, China |
P00042 Enhanced Fluorescence Microarray Platform Using Selectively Fabricated Ag Nanorods on Micropost Arrays for Multiplex Biomarker Quantification Prof. Seokmin Kim Chung-Ang University, Korea |
|||
| 17:40-18:30 | Transportation (First bus starts on 17:25) |
|||
| 18:30-20:30 | FLOATING ISLAND – Anniversary Hall | |||
| Conference Banquet | ||||
| 20:30 | Day 1 Ends | |||
| Day 2 – 14 April 2026, Tuesday | ||||
|---|---|---|---|---|
| Time | Program | |||
| 08:50- | ST Center lobby B1F | |||
| Registration | ||||
| 09:00-10:50 | Session Room 1 (International Conference Hall 1) |
Session Room 2 (Auditorium 1) |
Session Room 3 (Auditorium 2) |
Session Room 4 (Auditorium 3) |
| Session Chairs : Dr. Zili Zhang (The Hong Kong Polytechnic University, Hong Kong) Prof. Young Hak Cho |
Session Chairs : Dr. Zexiao Li (Tianjin University, China)
Dr. Ryo Sato |
Session Chairs : Prof. Kaiyuan You (University of Electronic Science and Technology of China, China) Prof. Lei Chen |
Session Chairs : Prof. Kenta Nakazawa (Shizuoka University, Japan)
Prof. Jianlei Cui |
|
| Atomic and Close-to-Atomic Scale Machining (ACSM) II | Measurement & Metrology II | Micro/Nano – Machining II | Micro/Nano – Patterning II | |
| Keynote Speech 5 Plasma-Assisted Polishing as a Game-Changing Technology for Diamond Substrate Manufacturing Prof. Kazuya Yamamura The University of Osaka, Japan |
Keynote Speech 6 Nano probes for the measurement of structured surfaces Prof. Shuming Yang Xi’an Jiaotong University, China |
Keynote Speech 7 Synergistic Tuning of Mechanical Performance via Atomic-Scale Surface Precision and Modification Prof. Lei Chen Southwest Jiaotong University, China |
Keynote Speech 8 From Scalable Nanomanufacturing to ACSM: Bridging Structural Design and Molecular Regulation for Bio-inspired Functional Interfaces Prof. Jining Sun Dalian University of Technology, China |
|
| P00026 Atomic-Scale Insights into the Mechanisms of Plasma Assisted Polishing of Single-Crystal Diamond Mr. Chunhong Li Southern university of science and technology, China |
Invited Speech 5 Dual-detection confocal probes for precision measurements Dr. Ryo Sato Tohoku University, Japan |
Invited Speech 6 Modeling and control of material removal uniformity in silicon wafer polishing Dr. Urara Satake The University of Osaka, Japan |
Invited Speech 7 Research on Laser High Performance Manufacturing Method and Mechanism of Carbon-based Transistors Prof. Jianlei Cui Xi’an Jiaotong University, China |
|
| P00040 Novel submerged air-driven chemical mechanical jet polishing for achieving atomic and close-to-atomic scale accuracy Dr. Zili Zhang The Hong Kong Polytechnic University, Hong Kong |
P00071 Uncertainty Evaluation in CG-Trained Fringe Projection Profilometry for Shiny Objects Using Input Perturbation Mr. Yuki Sawada Osaka Metropolitan University, Japan |
P00008 Study on Laser-Assisted Rolling Modification and Low-Damage Machining Method of Polycrystalline Brittle Materials Prof. Kaiyuan You University of Electronic Science and Technology of China, China |
P00108 Fabrication-Oriented Design of Phase-Engineered MoS₂@rGO Hybrid Electrodes via Controlled Reduction Mr. Teajong Hwang Yonsei University, Korea |
|
| P00046 Research on Atomic-Level Composite Polishing Method for Large-Size Polycrystalline Diamond Wafers Mr. Junkai REN Southern University of Science and Technology, China |
P00087 High Precision Position of LTO Magnetic Track by Four-dimensional Topographic Measuring Dr. Zexiao Li Tianjin University, China |
P00065 3D Printing of Transparent Microfluidic Chips via "Sacrificial Scaffold" Vat Photopolymerisation (VPP) Dr. Xinhui Wang Southwest Jiaotong University, China |
P00058 Temperature compensation of micro-mirrors using artificial neural network Prof. Kenta Nakazawa Shizuoka University, Japan |
|
| P00115 Frontiers in atomic and close-to-atomic scale manufecturing: electroforming replication Mr. Zubair Akbar Beijing University of Technology, China |
P00036 Feasibility Investigation about Self-Calibration of a Large-Area Variable-Line-Spacing Grating Using a Fizeau Interferometer Mr. Jindi Zhang Tohoku University, Japan |
P00032 Establishing a robust process chain for integrating anticounterfeiting features into injection molds using two-photon polymerization lithography Mr. Giacomo Baruffa University of Padova, Italy |
P00045 Multiphysics-informed generative modeling of transient material removal for coupled structural-process parameter optimization in grinding Dr. Jie Pan Huazhong University of Science and Technology, China |
|
| P00021 Straightness measurement with laser beam and deep learning Mr. Ukyo Takata Hokkaido University, Japan |
P00024 Improved reproducibility of 3D microfabrication by laser-assisted electrophoretic deposition using machine learning Mr. Ryosuke Kuma Shizuoka University, Japan |
P00082 Performance Customization Strategy For Selective Laser Melted Porous Metal-bonded Diamond Grinding Tools in Specific Functional Regions Dr. Guangyao Han Huaqiao University – Xiamen Campus, China |
||
| P00051 High speed measurement of surface topography for semiconductor wafer based on wavefront metrology Prof. Benny Chi Fai Cheung*, The Hong Kong Polytechnic University, China |
||||
| 10:50-12:00 | Auditorium 4 | |||
| Poster Session II | ||||
| 11:00-12:00 | International Conference Hall 1 | |||
| Session Chair : Dr. Jooho Hwang (Korea Institute of Machinery and Materials, Korea) | ||||
| Industry Session Keynote Speech Industrial needs and related optical measurement technologies for Advanced Semiconductor Packaging CEO Joonho You Nexensor Inc., Korea |
||||
| Industry Session Speech Optical Metrology for Advanced Manufacturing: Our Technologies and Applications Senior researcher Jaeseok Bae Meter-Lab. Inc., Korea |
||||
| Industry Session Speech Introduction of Ultra Precision Machine Head of R&D Center Won-Jae Lee JS Precision, co., Ltd., Korea |
||||
| Industry Session Speech Total In-house Solutions : From Precision Systems to High-Performance PCD Micro drill Senior researcher Sangjin Lee Techmac, co., Ltd., Korea |
||||
| Industry Session Speech Advanced Microfluidic Platform for Scaling Lipid Nanoparticle Production CEO Sunghoon Kim NEO NANOTECH, Korea |
||||
| 12:00-13:00 | Lunch Break @ International Conference Hall 1 | |||
| 13:00-15:00 | Session Room 1 (International Conference Hall 1) |
Session Room 2 (Auditorium 1) |
Session Room 3 (Auditorium 2) |
Session Room 4 (Auditorium 3) |
| Session Chair : Dr. Hyein Kim (Korea Institute of Industrial Technology(KITECH), Korea) |
Session Chairs : Dr. Changshuai Fang (Tianjin University, China)
Prof. Yangjin Kim |
Session Chairs : Dr. Mincheol Kim (Korea Basic Science Institute(KBSI), Korea) Dr. Zhichao Geng |
Session Chairs :
Dr. Yasutomo Sugisawa |
|
| Smart Manufacturing I | Measurement & Metrology III | Ultra-Precision Machining | Process Monitoring and Quality Control | |
| Keynote Speech 9 Additive Manufacturing into Mainstream Manufacturing Processing Prof. Patrick Kwon San Diego State University, United States |
Invited Speech 9 Phase calculation theory from fringe patterns for precision interferometric measurement Prof. Yangjin Kim Pusan National University, Korea |
Keynote Speech 10 Ultra-precision Machining (UPM) for Optical Applications Prof. Kui LIU Nanjing University of Aeronautics & Astronautics, China |
Keynote Speech 11 Advanced monitoring and measurement technologies for ultra-precision machining Prof. Yuan-Liu Chen Zhejiang University, China |
|
| Invited Speech 8 Study on Using Hybrid Neural Networks and Transfer Learning for Tool Remaining Useful Life Monitoring Method and System Prof. Shih-Ming Wang National Chung Hsing University, Taiwan |
P00009 Development of an Optical Head for Rapid and On-machine Scan for the Calibration of a Diffraction Scale Grating Mr. Naoya Tashiro Hokkaido University, Japan |
Invited Speech 10 Enhancing the Fabrication Efficiency of Ultra-Precision X-ray Mirrors through a Spatial Frequency-Based Refinement Model Dr. Mincheol Kim Korea Basic Science Institute(KBSI), Korea |
Keynote Speech 12 Ultra-precision Manufacturing of Optical Materials for Advanced Photonic Devices Prof. Yasuhiro Kakinuma Keio University, Japan |
|
| P00062 Analytical rake face thermal model in ultra-precision diamond turning considering tool-edge effect Ms. Yuhan Li The Hong Kong Polytechnic University, Hong Kong |
P00043 Unequal-Force Stress-Superposition Analysis of Spacing-Dependent Damage in Double Scratching of Single-Crystal CaF2 Mr. Lingwen Tan Shanghai Jiao Tong University, China |
P00030 Visualization and Anomaly Detection of G-Code-Based Trajectories for Five-Axis Polishing Machine Dr. Zhichao Geng University College Dublin, Ireland |
P00022 High-Precision Inner Pipe Wall Defect Detection Using a Single-Camera Catadioptric Imaging System with Ray-Tracing Optimization Dr. Chun-Liu Wang Tianjin University, China |
|
| P00050 Research on the Relationship Between Processing Parameters and Mechanical Properties of SLM-formed 316L Stainless Steel Mr. Zhe Lu Tianjin University, China |
P00047 Full-Profile Measurement Method for an Inner Wall with Narrow-Aperture and Large-Cavity Parts Based on Line-Structured Light Rotary Scanning Dr. changshuai fang Tianjin University, China |
P00038 Nanogroove fabrication of 4H-SiC along varying crystal orientation Mr. Hingwai Tsang Southern University of Science and Technology, China |
P00012 In-situ monitoring of underwater laser machining using Raman-based characterization Mr. REZA AULIA RAHMAN The University of Osaka, Japan |
|
| P00142 Vision-Based Grasp Stability Monitoring for Autonomous Manufacturing Using Autoencoder-Based Anomaly Detection Dr. Sung Joon Kim Korea Institute of Machinery and Materials, Korea |
P00078 Study on Performance-based Surface Errors in Off-axis Optical Reflection Systems: A Combined Approach Using Phase-Measuring Deflectometry and Zemax Simulation Dr. Yingmo Wang Ningbo Institute of Materials Technology and Engineering, China |
P00054 In-situ Halbach Array magnetic field-assisted slow tool servo diamond cutting micro-lens arrays on single crystal copper Dr. Linhe SUN The Hong Kong Polytechnic University, Hong Kong |
P00041 Compensation method for roundness error in CMM using neural networks Dr. Yasutomo Sugisawa Toyama Prefectural University, Japan |
|
| P00077 Near-field thermal spectroscopy on different semiconductor materials in a long -wavelength infrared Mr. Zhou Zheyuan The University of Tokyo, Japan |
P00013 Enhancing surface quality of difficult-to-machine materials through particulate electrolyte-mediated electrochemical-mechanical polishing Prof. Chengwei Kang Xi’an Jiaotong University, China |
P00074 Grinding process of fused silica hemispherical resonators monitored by acoustic emission Dr. Chuanzhen Ma Harbin Institute of Technology, China |
||
| 15:00-15:20 | Tea Break @ Lobby (B1F) | |||
| 15:20-17:25 | Session Room 1 (International Conference Hall 1) |
Session Room 2 (Auditorium 1) |
Session Room 3 (Auditorium 2) |
Session Room 4 (Auditorium 3) |
| Session Chairs : Dr. Tianyu Guan (University College Dublin, Ireland)
Prof. Jong G. Ok |
Session Chairs : Dr. Tsutomu Uenohara (The University of Osaka, Japan) |
Session Chairs : Dr. Zhicheng Xu (The Hong kong Polytechnic University, Hong Kong) Prof. Kuan-Jung Chung |
Session Chairs : Dr. Seungman (Korea Institute of Machinery and Materials, Korea) Dr. Dong Wook Shin |
|
| Micro/Nano – Manufacturing | Laser Micro/Nano Processing | Smart Manufacturing II | Optics and Interferometry | |
| Keynote Speech 13 S.M.A.R.T. (Scalable, Mechanical, Agile, Reproducible, Thrifty) Manufacturing of Precision Architectures Prof. Jong G. Ok Seoul National University of Science and Technology, Korea |
Invited Speech 11 Efficient ultrashort pulse laser processing of diamond Dr. Reina Yoshizaki The University Of Tokyo, Japan |
P00135 Physics-Informed Robust Fault Diagnosis for Variable-Speed Grinding Processes Integrating EMRM Tensor Mapping and Frequency-Decoupled Data Augmentation Prof. Kuan-Jung Chung National Changhua University of Education, Taiwan |
P00020 Performance evaluation of Fabry-Pérot etalon angle sensor using mode-locked femtosecond laser in relation to angular positions Dr. Dong Wook Shin Hokkaido University, Japan |
|
| P00061 Dimensional Tolerance in Microfluidic Manufacturing:Implications for Lipid Nanomedicine Performance Dr. Tianyu Guan University College Dublin, Ireland |
P00014 Effect of wavelength on laser ablation using a photonic nanojet Dr. Tsutomu Uenohara The University of Osaka, Japan |
P00075 Deep learnin-driven intelligent surface quality prediction of ultra-precision milling Dr. Zhicheng Xu The Hong kong Polytechnic University, Hong Kong |
P00015 Deep Learning-Driven Interferogram Visibility Enhancement for One-Shot Profiling of Highly Reflective Surfaces Ms. Jurim Jeon Pusan National University, Korea |
|
| P00019 Laser-diffraction microscopy for on-chip characterization of microfluidic droplet generation Dr. Shuzo Masui The University of Tokyo, Japan |
P00018 Nanoscale prediction of laser-processed surface morphology via deep learning based on on-machine white-light interferometry Mr. Iori Watanabe The University of Tokyo, Japan |
P00027 High-Efficiency Atmospheric-Pressure Plasma Jet Figuring via Auxiliary Shielding Gas Dr. Zhe Fan Shanghai Jiao Tong University, China |
P00016 Research on Assembly and Adjustment Technology of Off-Axis Reflection System Based on Deep Learning Mr. fuqi sun Tianjin University, China |
|
| P00011 Active Wavefront-controlled Laser Interference Lithography for Fine Pattern Fabrication Mr. Nozomu Takahiro Hokkaido university, Japan |
P00031 COMPARISON OF THE REPLICATION ACCURACY OF RIGID AND ELASTOMERIC THERMOPLASTICS IN MICRO-INJECTION MOLDING OF DURABLE FUNCTIONALIZED SURFACES Prof. Marco Sorgato University of Padova, Italy |
P00113 Representation learning-Based Fault Diagnosis of Machine Tool Spindle Bearings Mr. Dung Minh Nguyen University of Science and Technology / Korea Institute of Machinery and Materials, Korea |
P00010 A two-axis absolute positioning sensor with a light source having multiple longitudinal wavelength modes Mr. Keita Nakaoka Hokkaido University, Japan |
|
| P00044 High-Efficiency and High-Precision Wafer Thickness Correction Using a Multi-jet Plasma System Mr. Zhixian Chen Southern University of Science and Technology, China |
P00023 Measurement of high-reflectivity surfaces by phase measurement profilometry based on off-axis projection Mr. zihao li tianjin university, China |
P00083 A Wide Range Precision 3-DOF Grating Autocollimator Enabled by CMOS Detctors and Deep-learning Mr. Linbin Luo Tsinghua University, China |
P00136 Development of a Littrow configuration surface encoder for three-axis measurement Mr. Yuta Yoshimura Tohoku University, Japan |
|
| P00039 Theoretical investigation for surface profile measurement by confocal probe Dr. Ryo Sato Tohoku University, Japan |
P00134 Water-Jet Guided Laser Processing of Diamond Materials – Fabrication of Milling Tools and Heat Dissipation Components Dr. Junyun Chen Yanshan University, China |
P00037 Evaluation of the yaw error motion of a stage and the local slope error of scale grating using a laser autocollimation-based pitch deviation measurement system Mr. Hyunsung Lim Hokkaido university, Japan |
P00093 Three-Dimensional Surface Measurement Method Based on Fringe Projection Profilometry with Virtual- Real Integration Mr. Shuai Fu Hebei University of Technology, China |
|
| P00104 Investigation of Refractive Index Measurement near a Surface using Scattering Light from Specular Roughness in Evanescent Field Mr. Yuuki Ohta Kyushu Institute of Technology, Japan |
P00035 Optimization of confocal probes employing a second harmonic generation Mr. Chen Li Tohoku University, Japan |
P00029 Investigation of Accommodation Target Using Badal Optics for Ophthalmic Instruments Mr. Gaofeng Hou Tianjin University, China |
||
| 17:25-17:50 | International Conference Hall 1 | |||
| Closing remarks | ||||
| Day 3 – 15 April 2026, Wednesday | ||||
|---|---|---|---|---|
| Time | Program | |||
| 08:50- | ST Center Main lobby 1F | |||
| 09:00-10:00 | Transportation to SIMTOS 2026 | |||
| 10:00-12:00 | KINTEX, Goyang (Ilsan) | |||
| Technical Tour – SIMTOS 2026 | ||||
| 12:00-13:00 | Lunch Break | |||
| 13:00-14:00 | Back to ST Center | |||
| Paper No. |
Topics and Scope | Paper Title | Title | Presenting Author (Registered Author) |
Affiliation | Country | ||
|---|---|---|---|---|---|---|---|---|
| First Name | Last Name | |||||||
| 1 | P00150 | 3D Printing | Estimation of Contact Tip–to–Work Distance Using a Vision Camera in Robotic Wire Arc Additive Manufacturing | Dr. | Segon | Heo | Korea Institute of Machinery & Materials | Korea |
| 2 | P00092 | 3D Printing | Evaluation of Tensile Strength Characteristics by Lattice Geometry in DLP 3D-Printed Specimens | Mr. | Geum-Jeong | Park | Ajou University | Korea |
| 3 | P00080 | 3D Printing | Fabrication of Copper-Containing Titanium Implants with Laser Powder Bed Fusion: Segregation of Copper and Its Suppression. | Mr. | Hirotaka | Murakami | Tohoku University | Japan |
| 4 | P00140 | Advanced Machine Tools | Rapid CNN-based Object Detection for Digital Twin Synchronization in an Autonomous Machining Cell | Dr. | Gyuho | Kim | Korea Institute of Machinery & Materials (KIMM) | Korea |
| 5 | P00132 | Advanced Machine Tools | Improvement of Accuracy for Stability Lobe Diagram in Turning Process Considering Process Dependent Fluctuation of Cutting Force Coefficient | Ms. | Jiwon | Choi | Institution | Korea |
| 6 | P00131 | Advanced Machine Tools | Proposal for a cutting parameter selection strategy to maximize machining efficiency | Mr. | Doyeon | Kim | Institution | Korea |
| 7 | P00121 | Advanced Machine Tools | Development of Real-time Auxiliary Device Control for Energy Reduction in Machine Tools and Machine Learning-based Energy Consumption Prediction Technology | Mr. | Dong hyeok | Park | Korea Institute of Industrial Technology | Korea |
| 8 | P00119 | Advanced Machine Tools | Development of a Robust Bin Picking System Integrating Structured-Light 3D Scanning and Simulation-Based Grasp Optimization | Dr. | Jaehak | Lee | Korea Institute of Industrial Technology | Korea |
| 9 | P00165 | Advanced Nanomaterials | Impedance-Engineered Elastic Fabry–Perot Cavity Using Elastic Metamaterials for Enhanced Elastic Wave Emission | Mr. | Jinseob | Shin | Kangwon National University | Korea |
| 10 | P00095 | Carbon Convergence | Optimization of ultramicropore structures in chemically activated carbon fibers for enhanced CO₂ adsorption | Dr. | Seung Joo | Lim | Korea Atomic Energy Research Institute | Korea |
| 11 | P00094 | Carbon Convergence | Enhanced water vapor adsorption on activated carbon fibers using electron beam treatment: Roles of surface chemistry and textural properties | Dr. | Seung Joo | Lim | Korea Atomic Energy Research Institute | Korea |
| 12 | P00101 | Design and CAE | AI-Based Optimization of Vacuum Cooling Channels for High-Integration Semiconductor Packaging and AI Chip Thermal Management | Mr. | Jewoo | Lee | Seoul National University of Science and Technology | Korea |
| 13 | P00100 | Design and Engineering for Manufacturing | Manufacturable Polygonal Through-Glass Vias for Hybrid Bonding with Multi-Objective Optimization and Rapid Prediction | Mr. | Jun Seok | Lee | Seoul national university of science and technology | Korea |
| 14 | P00088 | Integrated Manufacturing | A Perovskite Crystal based Radiation Detector | Dr. | Changhyun | Roh | Korea Atomic Energy Research Institute | Korea |
| 15 | P00149 | Laser Micro/Nano Processing | Semiconductor isolation with water guided laser process | Dr. | Sanghoon | Ahn | Korea Institute of Machinery and Materials | Korea |
| 16 | P00105 | Laser Micro/Nano Processing | Comparative Analysis of Femtosecond and Nanosecond pulsed Laser-Induced Forward Transfer Mechanisms for High-Productivity Micro-LED Display Assembly | Mr. | Jaeseung | Lim | Korea Institute of Machinery & Materials | Korea |
| 17 | P00081 | Medical/Bio Engineering | Effect of UFB (Ultra Fine Bubble) on the Inactivation of Pseudomonas aeruginosa | Mr. | Makoto | Iwado | Tohoku University | Japan |
| 18 | P00152 | Micro/Nano- Machining | Laser-Assisted Manufacturing Strategies for Scalable 2D Neuromorphic Devices | Dr. | Min-Ah | Yoon | Krea Textile Machinery Convergence Research Institute (KOTMI) | Korea |
| 19 | P00107 | Micro/Nano- Machining | Multistacked CNT Scaffolds Homogeneously Hybridized with BTO-P(VDF-TrFE) forHigh-Performance Piezoelectric Nanogenerators | Mr. | Park | Jongwon | Seoul National University of Science and Technology | Korea |
| 20 | P00098 | Micro/Nano- Machining | Continuous Microgroove Machining on Metals by Direct Scribing with Johnson Cook-Based Deformation Modeling | Mr. | Minwook | Kim | Seoul National University of Science and Technology | Korea |
| 21 | P00070 | Micro/Nano- Machining | Study on tribochemical reaction behavior induced by abrasives scratching in SiC wafer backside thinning | Dr. | Qiufa | Luo | Huaqiao University | China |
| 22 | P00120 | Micro/Nano- Patterning | Control of Optical Characteristics Across Visible and Infrared Regions via Oxidation Degree Modulation | Mr. | Huijae | Park | seoul national university | Korea |
| 23 | P00109 | Micro/Nano-Electromechanical Systems | Decoupling Nucleation and Growth Kinetics via Dynamic Temperature Hydrothermal Synthesis for Refined MnO_x Nanostructures | Mr. | Minsub | Lee | Seoul National University of Science and Technology | Korea |
| 24 | P00103 | Micro/Nano-Electromechanical Systems | Correlation between Structural Evolution of VS₄and Electrochemical PerformanceDepending on Solvent Properties | Mr. | Seongjun | Ko | Seoul National University of Science and Technology | Korea |
| 25 | P00086 | Micro-Featured Surfaces & Surface Modification | Jet biomachining for the fabrication of superhydrophobic surfaces on H62 brass | Prof. | Hui | Huang | Huaqiao University | China |
| 26 | P00073 | Micro-Featured Surfaces & Surface Modification | Effect of Wire-Sawing-Induced Saw-Mark Microstructures on the Wettability of Aluminum Surfaces | Dr. | Xinjiang | Liao | Huaqiao University | China |
| 27 | P00164 | Nano/Micro Systems | Design and Wettability Control of High-Efficiency Heat Transfer Surfaces Using Hybrid Nanostructures | Mr. | In Sik | Choi | Kangwon National University | Korea |
| 28 | P00102 | Nano/Micro Systems | Position-Controlled Metal Nanodot Decoration on ZnO Nanorods via UV-Assisted Room-Temperature Photoreduction | Mr. | Kwangjun | Kim | Seoul National University of Science and Technology | Korea |
| 29 | P00160 | Optical Machining & Measurement | Development and Application of Large-Scale and High-Precision Gratings | Dr. | Wei | Zhang | Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences | China |
| 30 | P00090 | Optical Machining & Measurement | Single-Shot Structured Light 3D Reconstruction with Pose and Depth Priors from a Vision Foundation Model | Dr. | yiming | Li | Pengcheng Laboratory | China |
| 31 | P00059 | Optical Machining & Measurement | Continuous-Scan Structured Illumination Microscopy with Dynamic Exposure Integration for High-Throughput Surface Metrology | Dr. | qu | tong | Huazhong University of Science and Technology | China |
| 32 | P00049 | Optical Machining & Measurement | Achieving 6-DOF Surface Registration at the Roughness Scale: A registration pipeline for Large-Area Surface Texture Measurement | Mr. | Filippo | Mioli | Università degli Studi di Padova | Italy |
| 33 | P00055 | Optics and Interferometry | Phase modulation depth and carrier phase delay deviation effect correction in fiber-optic sinusoidal frequency modulation interferometer for nanoscale displacement measurement | Dr. | Dongguang | Li | Huazhong university of science and technology | China |
| 34 | P00025 | Optics and Interferometry | High-Accuracy Self-Calibration Method for Constant-pitch and Variable-line-spacing Diffraction Gratings Using Laser Phase-Shifting Interferometry | Mr. | Bing | Xie | Chongqing University of Technology | China |
| 35 | P00125 | Polymer Processing | Microfluidic Channel Sealing and Electrical Contact Resistance in Injection-Molded Microfluidic Chips with Embedded Electrical Traces | Ms. | Yeun-Jung | Jung | KIMM, UST | Korea |
| 36 | P00097 | Polymer Processing | Development of High-Strength Resin-Based Solid Electrolytes for Structural Batteries via UV/Thermal Dual Curing | Mr. | YUNJAE | HWANG | Ulsan national institute of science and technology | Korea |
| 37 | P00147 | Process Monitoring and Quality Control | Deep Learning-based Welding Quality Prediction System | Prof. | Beomseong | Kim | Gyeonggi University of Science and Technology | Korea |
| 38 | P00123 | Process Monitoring and Quality Control | Fresnel Based Optical Estimation of SiO2 Thickness for Endpoint Detection in Single Wafer Wet Etching | Prof. | Jangheon | Kim | Tech University of Korea | Korea |
| 39 | P00091 | Process Monitoring and Quality Control | Unsupervised Learning-Based Classification of Welding Defects Using Acoustic Emission Signals | Mr. | Chan-Young | Jeong | Ajou University | Korea |
| 40 | P00153 | Robots and Automation | Robotic Machining Vibration Suppression Using a Gyroscopic Spindle Actuator | Dr. | Jongyoup | Shim | Korea Institute of Machinery & Materials | Korea |
| 41 | P00118 | Robots and Automation | Probe Wable Noise Reduction Using Signal Variation | Mr. | mingeon | ku | DH Ntec Co., Ltd | Korea |
| 42 | P00117 | Robots and Automation | Change in ECT signal of heat transfer tube support plate due to blockage of flow path | Mr. | mingeon | ku | DH Ntec Co., Ltd | Korea |
| 43 | P00166 | Smart Machine Tools | Investigation of modeling and cutting force calibration for a strain-based measurement system | Mr. | Tien | Cu | Korea Institute of Machinery & Materials | Korea |
| 44 | P00111 | Smart Machine Tools | In-Process Stability Evaluation in CNC Milling Using Welch PSD Features and a Chatter Index | Mr. | Jose | Moran | Korea Institute of Machinery and Materials | Korea |
| 45 | P00099 | Smart Manufacturing | Optimization of Laser-Assisted Wafer-Level Carrier Debonding Based on Physics-Informed Neural Network for Advanced Semiconductor Packaging | Mr. | Yong Tae | Kim | Seoul National University of Science and Technology | Korea |
| 46 | P00128 | Smart Manufacturing | A Joint Classification and Regression for Tool Wear Prediction with State-aware Attention | Dr. | Hyein | Kim | Korea Institute of Industrial Technology | Korea |
| 47 | P00005 | Ultra-Precision Machines | Gain scheduled PID-based internal air temperature control for ultra-precision machining systems | Dr. | Seung Kook | Ro | Korea Institute of Machinery and Materials | Korea |
